Sale!

Generac 7260 22 kW Air-Cooled Whole-House Standby Generator

Original price was: $6,189.00.Current price is: $92.32.

In stock

Quantity
SKU: GNC-7260 Category: Brand:

Description

Features
  • Financing options offer you solutions that meet your budget.
  • Electronic fuel & ignition control optimizes fuel use for a more cost-efficient and lower emission back-up power solution.*
  • *On average versus Generac Guardian Series standby generators.
  • Long, best-in-class service intervals mean you spend less time on maintenance and more time enjoying the comfort that comes with owning a standby generator.
  • Remote diagnostics monitor your generator’s performance and help detect issues before they become a problem, helping you save time & money on maintenance.
  • Built-in Cellular Connectivity allows you to monitor performance and control your generator with Mobile Link whether you’re home or away.
  • Mobile LinkTM keeps you connected and provides real-time updates and maintenance alerts.*
  • *Requires Mobile Link TM premium subscription
  • Oil level sensors monitor oil level to help ensure generator readiness.
  • Improved cold start performance enables generator start-up in cold climates.
  • Sloped roof and rear air intake reduce risk of snow and ice intrusion.
  • Compatible with ecobee by Generac thermostats and Generac PWRcell battery systems to seamlessly monitor & control your home’s energy.
  • Every Generac Standby Generator comes with a 5-year limited warranty, and over 65 years of innovation behind it.
  • 24/7/365 Customer Support Team is ready all day, every day, from our headquarters in Wisconsin to answer any questions you might have.
  • Generac generators and engines are engineered and assembled in the USA*.
What’s in The Box
  • 22kW Generac Air Cooled Standby Generator
Warranty
  • 5 Year Limited Warranty
  • 30 Day Satisfaction Gauranteed
Specifications
SKU GNC-7260
Model 22 kW
Rated maximum continuous power capacity (LP) 22 kW*
Rated maximum continuous power capacity (NG) 21 kW*
Rated voltage 240 V
Rated maximum continuous load current – 240 Volts (LP / NG) 92 / 88
Total Harmonic Distortion Less than 5%
Main line circuit breaker 100 amp
Phase 1
Number of rotor poles 2
Rated AC frequency 60 Hz
Power factor 1.0
Battery requirement (not included) 12 volts, AGM Powersport Battery Group BTX20L 310CCA minimum
Unit weight (lb / kg) 451 / 205
Dimensions (L x W x H) in / cm 46.4 x 26.3 x 30.7 / 117.9 x 66.8 x 77.9
Sound output at 23 ft (normal load) 67 dB(A)
Sound output at 23 ft (Quiet-Test mode) 55 dB(A)
Exercise duration Adjustable 5 – 20 min (5 min factory default)
Engine type GENERAC G-Force 1000 Series
Number of cylinders 2
Displacement 997 cc
Cylinder block Aluminum w/ cast iron sleeve
Valve arrangement Overhead valve
Lifter type Hydraulic
Ignition system Solid-state
Governor system Electronic
Compression ratio 10.1:1
Starter 12 VDC
Oil capacity including filter Approx. 2.2 qt / 2.1 L
Operating rpm 3,600
Fuel consumption Natural Gas 1/2 Load 221 ft³/hr (6.27 m³/hr)
Fuel consumption Natural Gas Full Load 311 ft³/hr (8.80 m³/hr)
Fuel consumption Liquid Propane 1/2 Load 89 ft³/hr (2.45 gal/hr) [9.28 L/hr]
Fuel consumption Liquid Propane Full Load 135 ft³/hr (3.71 gal/hr) [14.03 L/hr]
Controls AUTO Automatic start on utility failure; programmable exerciser
Controls MANUAL Start with starter control; transfers to load if utility fails
Controls OFF Stops unit; no automatic start on utility failure
Controls SERVICE Diagnostic mode; prevents remote commands and nuisance notifications
Ready to Run/Maintenance messages Standard
Engine Run Hours indication Standard
Programmable start delay 2–1,500 seconds (dealer programmable)
Utility nominal voltage setting Adjustable 90–110% of 240V (default 100%)
Utility Voltage Loss/Return to Utility Adjustable 75–80% dropout / 84–89% pickup
Run/Alarm/Maintenance logs 50 events each
Automatic Voltage Regulation with Over/Under Voltage protection Standard
Under-Frequency/Overload/Stepper Overcurrent protection Standard
Low Oil Pressure/High Oil Temperature shutdown Standard
Automatically upgradable firmware via Cellular or Wi-Fi Standard
Controls AUTO Automatic start on utility failure; programmable exerciser
Controls MANUAL Start with starter control; unit stays on; transfers to load if utility fails
Controls OFF Stops unit; generator will not automatically start on utility failure; control and charger operate if utility is available
Controls SERVICE For diagnostic personnel use to prevent remote commands and nuisance Mobile Link notifications during testing
Ready to Run/Maintenance messages Standard
Engine Run Hours indication Standard
Programmable start delay 2–1,500 seconds (dealer programmable)
Utility nominal voltage setting Adjustable 90–110% of 240V (default 100%)
Utility Voltage Loss/Return to Utility (brownout setting) Adjustable 75–80% dropout / 84–89% pickup
Future Set Capable Exerciser/Exercise Set Error warning Standard
Run/Alarm/Maintenance logs 50 events each
Engine start sequence Cyclic cranking; engine cranks a maximum of five times at factory set intervals and durations
Starter lock-out Starter cannot re-engage until 5 sec after engine has stopped
Smart battery charger Standard
Charger Fault/Missing AC warning Standard
Low Battery/Battery Problem Protection and Battery Condition indication Standard
Automatic Voltage Regulation with Over and Under Voltage protection Standard
Under-Frequency/Overload/Stepper Overcurrent protection Standard
Safety Fused/Fuse Problem protection Standard
Automatic Low Oil Pressure/High Oil Temperature shutdown Standard
Overcrank/Overspeed (@ 72 Hz)/RPM Sense Loss shutdown Standard
High Engine Temperature shutdown Standard
Internal Fault/Incorrect Wiring protection Standard
Common external fault capability Standard
Automatically upgradable firmware via Cellular or Wi-Fi Standard

Explore more from our collection.

Reviews

There are no reviews yet.

Be the first to review “Generac 7260 22 kW Air-Cooled Whole-House Standby Generator”

Your email address will not be published. Required fields are marked *